Re-Installing The Sata Dom; Concluding Steps - Fujitsu PRIMERGY CX2550 M2 Upgrade And Maintenance Manual

9.2.3.3

Re-installing the SATA DOM

Ê Secure the SATA DOM module on the SATA DOM spacer with the nylon
screw as described in
9.2.3.4

Concluding steps

Perform the following procedures:
"Installing the riser module" on page 43
Ê
"Installing the server node in the server enclosure" on page 50
Ê
Ê If applicable, reconnect all external cables.
"Controls and indicators on the server node" on page 51
Ê
"Enabling SVOM boot watchdog functionality" on page 72
Ê
CX2550 M2
"Installing the SATA DOM" on page
Upgrade and Maintenance Manual
System board and components
154.
163