Program - Olivetti d-COPIA 1801 MF Operation Manual

Operation on the Machine > Copying

Program

By registering sets of frequently used functions as a single program, you can simply select the program number as
needed to recall those functions. You can also name the programs for easy identification when recalling.
NOTE
• Only copying functions can be registered and recalled as programs.
• Up to 4 programs can be registered.
Registering Program
Use the procedure below to register a program.
1
2
Configure the settings of the functions.
Configure the settings of the functions you want to register in a program.
For the settings of functions, refer to
Register the program.
1
Press the [Program] key.
2
Press the [▲] or [▼] key to select a program number (01 to 04) to register, and press the
[OK] key.
Select program
----------------
NOTE
• Unregistered program numbers are displayed with [----------------].
• If you select a program number already registered, the currently registered functions
can be replaced with a new set of functions.
3
Press the [▲] or [▼] key to select [Add], and press the [OK] key.
----------------
Add
Using Various Functions on page
1
1
5-25
5-10.
2
2