Pocket Handle (Front Control Only); Pocket Handle (Gdp615) - Haier GE GDF510P M4 Series Service Manual

Pocket Handle (Front Control Only)

The pocket handle is attached to the inner
door panel. The front control console must
be removed as previously described in Front
Control Console Removal (in this section).
Remove six 1/4-inch hex-head screws.
The pocket handle is clipped to the plastic inner
door and on the adapter of the stainless steel
(SS) inner doors.

Pocket Handle (GDP615)

Model GDP615H features a new pocket handle
design and has top controls.
The new pocket handle is attached to the outer
door panel with seven 1/4-inch hex-head screws.
To remove the handle, remove and separate the
door. Remove seven 1/4-inch hex-head screws.
The handle can be removed toward the inside of
the panel.
– 33 –