Inner Door Vent Cover - Haier GE GDF510P M4 Series Service Manual

Inner Door Vent Cover

The inner door vent cover must be removed to
separate the top control doors and to remove the
front control console from the inner door. Insert
two pocket-style flat-blade screw-drivers into
the vent, then turn counter-clockwise (CCW) to
remove.
To Separate the Door
1. Remove the door.
2. Remove the inner door vent cover.
3. Place the door on a protected surface to
prevent damage (the inner door facing up).
4. Remove the two 1/4-inch hex-head screws.
5. Slide the outer door panel away from the
console or control panel, approximately 3/4
inches.
6. Lift to separate inner and outer door panels.
Outer door has cutouts to
receive inner door tabs
To Reassemble the Door
1. Place the outer panel face down on a
protected surface.
2. Place the inner door face up, and position six
attachment tabs into the cutouts of the outer
panel.
3. Press the tabs firmly together while sliding the
inner panel onto the outer panel, using care
to make sure the outer panel mates properly
to the front or top console. The illustration
below has a portion of the door sectioned or
cut out to show the outer door panel engaged
with the attach tabs of the inner door.
4. Reinstall screws, inner vent cover and
reinstall the door.
– 30 –