Ricoh A-P3 Service Manual page 23

1000-SHEET FINISHER INSTALLATION (A681)
[C]
[B]
2. Fasten [A] (! x 2) loosely.
3. Hang the front stand [B] and rear stand [C] on the screws installed in step 2.
4. To secure the front and rear stands tighten [A] (! x 2) and secure the stands
(! x 4).
5. At the front, use handle [D] to pull out the stapler unit.
6. Remove the locking lever [E] (! x 1).
7. Align the finisher on the stands, and lock it in place by pushing the locking
lever.
8. Secure the locking lever (! x 1) and push the stapler unit into the finisher.
[A]
A681I704.WMF
1-12
6 November, 2001
[D]
[E]
A681I705.WMF