Checking The Program - Tascam CD-200 Owner's Manual

4 − Playing back CDs
[Data CD]
NOTE
If the program is already set, the track number and
playback time of the track set as program step 01 is shown.
(See "Checking the program" on page 20.)
2. Use the numeric keys or search (Ô/Â, ¯/) keys
to select a track to set as program step 01. (The MEMORY
indicator and the track number blink.) When using the
numeric keys, input the number starting with the leftmost
digit.
Track number
[Audio CD]
[Data CD]
NOTE
• When using a data CD, the screen switches to file name
display if more than a second passes after pressing a
Ô/Â, ¯/
numeric key or search (
still possible to add the track to the program.
• If you press the STOP key while a track is selected, selection
of that track is canceled, and the screen returns to the state
where you can select a track.
3. Press the PROGRAM EDIT key.
The selected track is added to program step 01. The unit is
now ready for you to add another track for the next program
step.
4. By repeating steps two and three above, you can add more
tracks sequentially as desired.
5. If you are finished adding tracks to the program, press the
PROGRAM EDIT key when the empty program step where
it is possible to add a track appears. The unit exits program
setting mode.
NOTE
• The same track can be added to the program multiple times.
• If you press the STOP key when the empty program step
where it is possible to add a track appears, all steps in the
program are cleared.
20
TASCAM CD-200
Program step
Playback time
) key, but it is
• If you try to add more than 99 tracks, a "PGM FULL" error
message appears. Only 99 tracks can be added.

Checking the program

You can check the contents of the program.
1. Press the PROGRAM EDIT key on the remote control to put
the unit into program setting mode.
The track number and playback time of the track set as
program step 01 is shown on the screen (playback time is
not displayed if the loaded disc is a data CD) and MEMORY
blinks.
Track number
2. Press the PROGRAM EDIT key to show the track information
of the next program step.
3. If you press the PROGRAM EDIT key when the final program
step is shown, it becomes possible to add another program
step. (No track number is displayed and the MEMORY
indicator blinks.)
4. Press the PROGRAM EDIT key again to exit the program
setting mode.
Program step
Playback time