4 − Playing back CDs
Folder playback (with data CDs only)
When playing a data CD, you can set a designated folder (the
current folder) as the playback area. Follow the procedures
below to set the playback folder. You can also set the playback
area to be the entire disc by selecting "ALL. "
FOLDER ˙/¥ keys
When using a data CD, by pressing the FOLDER ˙/¥ keys on
the main unit or the remote control, you can skip to the previous
or next folder. This will skip to the beginning of the first track in
the previous or next folder. If you hold down one of these keys,
you can skip through folders continually.
NOTE
When you skip to a different folder, it becomes the current
folder.
18
TASCAM CD-200
FOLDER ˙/¥ keys
Playback modes
This unit can play tracks using three types of playback modes.
Continuous playback (default setting)
The tracks on a disc are played back in numerical order.
NOTE
In folder playback mode, the tracks in the current playback
folder on a data CD are played back in numerical order. See
"Folder playback (with data CDs only)" on page 18 for
details.
Shuffle playback
The tracks on the disc are played back in random order
regardless of their track numbers. Playback stops after all tracks
have been played once.
NOTE
In folder playback mode, the tracks in the playback folder
on a data CD are played back in random order. See "Folder
playback (with data CDs only)" on page 18 for details.
Programmed playback
Tracks are played back in the programmed order. See
"Programmed playback" on page 19 for details.
Select the playback mode
Press the PLAY MODE/INTRO CHECK key on the main unit or
the remote control to cycle through the playback modes.
During playback, however, only continuous playback and shuffle
playback modes can be set.
To select programmed playback, press the PLAY MODE/INTRO
CHECK key when playback is stopped or no CD is loaded.
PLAY MODE
INTRO CHECK key
PLAY MODE
INTRO CHECK key