Remote Control Unit (Rc-Cd200) - Tascam CD-200 Owner's Manual

Remote control unit (RC-CD200)

2 − Names and Functions of Parts
Numeric keys
1
Use these keys to select tracks.
DISPLAY
2
Press this key to show for two seconds the type of infor-
mation (playback time or text information) that currently
appears in the main area of the display.
Press this key again while this is being shown to change the
type of information displayed. The type of information that
can be shown depends on the type of disc loaded and the
operation status. (See "Time and text information display" on
page 21.)
PLAY MODE/INTRO CHECK
3
Press briefly to change the playback mode. The three
playback modes are continuous, shuffle and programmed.
(See "Playback modes" on page 18.) Press and hold this key
to use the Intro Check function. (See "Intro Check" on page
23.)
FOLDER ˙/¥
4
Use these keys when a data CD is in the player to change the
playback folder. By selecting "ALL, " every folder on the disc is
made subject to playback. (See "Folder playback (with data
CDs only)" on page 18.)
Ô/ Â
5
Press this key briefly to skip to the previous track. Hold down
this key to search for a part of a track in the reverse direction.
¯/
6
Press this key briefly to skip to the next track. Hold down this
key to search for a part of a track in the forward direction.
OPEN/CLOSE
7
Use this key to open and close the disc tray.
PROGRAM EDIT
8
Use this to set, confirm and edit programs. (See
"Programmed playback" on page 19.)
REPEAT
9
Press this key to select single repeat or all repeat playback.
Press this key again to stop repeat playback. (See "Repeat
playback" on page 22.)
STOP
0
Use this key to stop playback.
PLAY/READY
q
Use this key to start or pause playback.
11
TASCAM CD-200