Tascam CD-200 Owner's Manual page 25

IMPORTANT SAFETY INSTRUCTIONS
If you are having trouble with the operation of this unit, please
try the following before seeking repair.
If these measures do not solve the problem, please contact
the store where you purchased this unit or TASCAM customer
support service.
No power
8
e Check the connection to the AC power supply.
Remote control doesn't work.
8
e Check to see if the batteries are properly installed in the
remote control.
e If the batteries are dead, change the batteries.
No sound
8
e Check the connection to the monitor system again.
e Check the volume and settings of the amplifier.
There is unwanted noise.
8
e Are the connecting cables all properly connected and
functioning?
A CD cannot be played back.
8
e If you are using a data CD with MP3 files, confirm that the file
bit-rates are compatible with this unit.
e Is the disc scratched or dirty?
The files on a data CD cannot all be played back.
8
e Is the unit in folder playback mode?
6 − Troubleshooting 6 − Troubleshooting
25
TASCAM CD-200