Checking The Program - Tascam CD-200 Owner's Manual

The unit enters program setting mode, and if no program
has been set, it will be possible to set a track to program
step 01 ( MEMORY indicator blinks).
[Audio CD]
[Data CD]
If the program is already set, the track number and play-
back time of the track set as program step 01 is shown.
(See "Checking the program" on page 19.)
2 Use the numeric keys or search (Ô/Â, ¯/)
keys to select a track to set as program step 01. (The
MEMORY indicator and the track number blink.) When
using the numeric keys, input the number starting
with the leftmost digit.
Track number
[Audio CD]
[Data CD]
When using a data CD, the screen switches to
•
file name display if more than a second passes
after pressing a numeric key or search (
¯/ ) key, but it is still possible to add the track
to the program.
If you press the STOP key while a track is selected,
•
selection of that track is canceled, and the screen
returns to the state where you can select a track.
3 Press the
PROGRAM EDIT
The selected track is added to program step 01. The unit
is now ready for you to add another track for the next
program step.
Program step
Playback time
Ô/Â,
key.
4 − Playing back CDs
4 By repeating steps two and three above, you can add
more tracks sequentially as desired.
5 If you are finished adding tracks to the program,
press the PROGRAM EDIT
program step where it is possible to add a track
appears. The unit exits program setting mode.
The same track can be added to the program mul-
•
tiple times.
If you press the STOP key when the empty program
•
step where it is possible to add a track appears, all
steps in the program are cleared.
If you try to add more than 99 tracks, a "PGM FULL"
•
error message appears. Only 99 tracks can be added.

Checking the program

You can check the contents of the program.
1 Press the PROGRAM EDIT
to put the unit into program setting mode.
The track number and playback time of the track set as
program step 01 is shown on the screen (playback time
is not displayed if the loaded disc is a data CD) and
MEMORY blinks.
Track number
2 Press the PROGRAM EDIT
information of the next program step.
3 If you press the PROGRAM EDIT
program step is shown, it becomes possible to add
another program step. (No track number is dis-
played and the MEMORY indicator blinks.)
4 Press the
PROGRAM EDIT
gram setting mode.
key when the empty
key on the remote control
Program step
Playback time
key to show the track
key when the final
key again to exit the pro-
19
TASCAM CD-200