Schwinn 270 Assembly Manual page 6

SPECIFICATIONS
Maximum User Weight:
Total Surface Area (footprint) of equipment: 11,424 cm
Machine Weight:
Power Requirements (AC Adapter):
Input Voltage:
Output Voltage:
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 1.3 m x 2.2 m (51 in x 87 in).
the side used to access the machine and to the rear of the machine clear.
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the "Important
Safety Instructions" before assembly.
• Collect all the pieces necessary for each
assembly step.
• Using the recommended wrenches, turn
the bolts and nuts to the right (clockwise)
to tighten, and the left (counterclockwise)
to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and
look through the bolt holes to help insert
the bolt through the holes.
• The assembly can require 2 people.
6
(1770.7 in
2
12V DC, 3A
1.3 m
( 51 in )
)
2
162.5 cm
(64")
2.2 m ( 87 in )
( 24 in )
126.8 cm
(49.9")
70.3 cm
(27.7")
0.6 m
( 24 in )
0.6 m