Security Erase - Psid (Physical Security Id) (*Available When An Sed Ssd Device That Supports This Feature Is Detected) - Supermicro X11 User Manual

2.7 Security Erase - PSID (Physical Security ID) (*Available
when an SED SSD device that supports this feature is
detected)
This feature allows the user to securely erase all data stored in a Self-Encrypting Solid
State Drive (SED SSD) that is compatible with this feature. Please note that the only way
to erase the data stored in an SED SSD with PSID support is to use the correct PSID to
securely erase the data in the select drive. There is no other way you can use to erase
data from such an SED SSD without using the correct PSID of this device.
Warning!! Please exercise extreme care. All data stored in the device along with your
user password will be erased if you select this feature, enter the correct PSID, and press
<Enter>.
To use this feature, select Security Function from the Supermicro Security Erase submenu
and press <Enter>. A popup dialogue box will display.
From the popup dialogue box, select Security Erase - PSID and press <Enter>. A screen
will display, showing that this feature: Security Erase - PSID is enabled as shown below.
Warning!! Please exercise extreme care. All data stored in the device and your user
password will be erased if you enter the PSID and press <Enter>.
Chapter 2: Configuring Secure Erase Settings in the BIOS
#34 Security Erase-PSID
#35 Security Erase - PSID Set
27