Supermicro X11 User Manual page 22

Super Secure Erase for the X11/X12/X13/B11/B12/B13/H11/H12/BH12/H13 Motherboards User's Guide
Press <F4> to save the setting and reboot the system for the change you've just made to
take effect. When prompted for confirmation, select <Yes> and press <Enter> to confirm
your change as shown below.
The system will then boot into the BIOS Setup utility, and you will be prompted for a
password. Enter the original password for this device in the dialogue box as shown below
and press <Enter> to continue with system boot. Press <Del> to enter the BIOS Setup
utility if you want to configure BIOS settings.
Note: Be sure to enter the correct password for the selected device. If an incorrect
password is entered for the selected drive, this disk drive will be locked. When this
happens, reboot the system to clear the invalid password and re-enter the correct one.
WARNING!! Be sure to keep your password (and PSID, if any) in a safe and secure place.
When a device is locked caused by an invalid password, it will remain locked, making
the BIOS Setup utility unavailable for configuration until the correct password is entered!
22