Supermicro X11 User Manual page 13

5. With NVMe Firmware Source set to AMI Native Support, press <F4> to save the
change and reboot the system. A confirmation dialogue box will display asking for your
confirmation. Select Yes and press <Enter> to save the change you've made and reboot
the system for the new setting to take effect.
6. During system reboot, press <Del> to enter the BIOS Setup utility to configure BIOS
settings.
7. When the AMI BIOS screen displays, using the arrow keys, select Security from the
BIOS menu bar on the top of the screen. The Supermicro Security Erase Configuration
submenu will display as shown below.
8. Select Supermicro Security Erase Configuration as shown above and press <Enter> to
enter the Supermicro Security Erase Configuration submenu as shown in the following
screen. The Supermicro Security Erase Configuration submenu allows the user to
configure Security Erase settings in the BIOS.
Chapter 2: Configuring Secure Erase Settings in the BIOS
13