Yamaha Vector RS90RX Owner's Manual page 31

1. Special wrench
2. Adjuster length
3. Rim
4. Scale range
4. Tighten the locknut while holding the con-
trol rod adjuster in place.
Locknut tightening torque:
35 Nm (3.5 m·kgf, 25 ft·lb)
ECS00320
CAUTION:
When using the special wrench, make
sure that it is situated at a right angle to
the control rod, and that it is tightly fitted
to the locknut or the control rod adjuster.
Control functions
25