4-17) Evap (Sensor) Ref - Samsung RF18A Series Service Manual

This document cannot be used without Samsung's authorization.
DISASSEMBLY AND REASSEMBLY

4-17) Evap (Sensor) REF

When disassembling, make sure the unit turned off.
Part Name How To Do Descriptive Picture
1. Remove the hosing connector at the left.
2. Cut the Cable Tie.
Evaporator
REF
3. Remove Sensor Housing from TPA.
Then, Remove the Fixer wire and Fixer sensor.
4. If you want Assemble, do reverse this process.
If you want to assembly, follow the reverse order.
47