DISASSEMBLY AND REASSEMBLY
3-12. Disassembling the REF EVAP Cover
How To Do
1. Remove the screw cover with the (-) screw
driver.
(See the figure)
Take care not to scratch the cabinet or
damage the screw cover.
Caution
2. Remove the 4 screws.
3. Pull the centre angle forward and push it down
to separate it. (Refer to the figure)
4. Pull the lower part of the cover forward and
press it downward to separate it. (Refer to the
figure)
5. Separate the 3 housing connectors.
(Refer to the figure)
Descriptive Picture
28