4-20) Evap (Sensor Temp) Fre - Samsung RF18A Series Service Manual

DISASSEMBLY AND REASSEMBLY

4-20) Evap (Sensor Temp) FRE

Part Name
1. Remove the hosing connector at the left.
2. Disassemble Sensor Housing from TPA, then
cut the Cable Tie.
Evaporator
FRE
3. Cut the Cable tie that tie Accumulator and
Sensor.
4. Remove the sensor temp. If you want
Assemble, do reverse this process.
This document cannot be used without Samsung's authorization.
How To Do
When disassembling, make sure the unit turned off.
If you want to assembly, follow the reverse order.
50
Descriptive Picture