DISASSEMBLY AND REASSEMBLY
4-31) Cover-Display
Part Name
1. Remove the Inlay.
2. Push between RELECTOR and LINER with (-)
screwdriver.
- Insert the screwdriver vertically to the end.
Cover-
Display
3. Tilt the screwdriver down and pull the display.
4. Disconnect Housing.
5. If you want Assemble, do reverse this process.
This document cannot be used without Samsung's authorization.
How To Do
Push Point
When disassembling, make sure the unit turned off.
Tilt Down
If you want to assembly, follow the reverse order.
62
Descriptive Picture