4-19) Evaporator Fre - Samsung RF18A Series Service Manual

DISASSEMBLY AND REASSEMBLY

4-19) Evaporator FRE

Part Name
1. Disconnect the housing wiring connector.
(Refer to the picture)
Evaporator
FRE
2. Cut the Evap Pipe and Suction Pipe welded
points. Then, remove the evaporator by pulling
the lower part of the evaporator out while
lifting it up.
3. If you want Assemble, do reverse this process.
This document cannot be used without Samsung's authorization.
How To Do
When disassembling, make sure the unit turned off.
If you want to assembly, follow the reverse order.
49
Descriptive Picture