Backup And Initialization; Backup Parameters; Initialization - Yamaha PSR-I300 Owner's Manual

Backup and Initialization

Backup Parameters

The following Backup parameters will be maintained
even if the power is turned off.
Parameters backed up as needed
• User Songs (page 45)
• Style Number 225–234 (page 30)
Parameters backed up when the power is turned off
• Registration Memory (page 47)
• FUNCTION Settings: (page 54)
Tuning, Split Point, Touch Response, Style Volume,
Riyaz Volume, Song Volume, Metronome Volume,
Your Tempo, Demo Group, Demo Play Mode, Mas-
ter EQ type, Sustain, Auto Power Off, Battery Type,
Guide, Audio Loop Back, Fingering Type, [AUX IN]
Audio Volume, [USB TO HOST] Audio Volume,
Style Freeze, Transpose Freeze, Voice Freeze
• Passing Status of Keys to Success (page 38)
In addition to the Backup parameters above, all the
data (including Style data that have not been loaded)
transferred from the connected computer will be
maintained even if you turn off the power.
Backup parameters other than "Passing Status of
Keys to Success" can be transferred and saved to a
computer as a single Backup file (with the extension:
.BUP). This backup file can be loaded to the instru-
ment for future.
For details on using a computer with this instrument,
refer to the online PDF manual (page 8) "Computer-
related Operations."
Error during Backup operation
When connecting to a computer with Storage Mode
(Function 058; page 57) set to on, there may not be
enough free space on the instrument to create a
backup file for transferring to the computer. In this sit-
uation, the error message "Not enough storage for
backup" scrolls on the display. If you want to save a
backup file to the computer, delete unnecessary
Song files or Style files of the instrument to secure
free space and set Storage Mode to off and back to
on again. A backup file is created.
If you do not save a backup file on the computer,
there is no problem if an error message is displayed,
and you can ignore the message.
NOTE
• The size of a backup file varies depending on the amount of
data stored on the instrument. The maximum capacity is
about 620KB.
• Even if a backup file for transferring to a computer is not cre-
ated, the backup data is retained in the instrument.

Initialization

You can initialize your original data via the following
two methods.
Backup Clear
This operation initializes the backup parameters and
the Registration Memories.
While holding down the highest white key, press the
[ ] (Standby/On) switch to turn the power on.
The highest white key
Flash Clear
This operation deletes all the Songs and Styles that
have been transferred from a computer. Note that
Style data registered to Style numbers 225–234 will
be maintained. While simultaneously holding the
highest white key and the three highest black keys,
press the [ ] (Standby/On) switch to turn the power
on.
The highest white key
and the three highest
black keys
NOTICE
• Keep in mind that Backup Clear and Flash Clear also
delete the data you have purchased. Be sure to save your
important data to a computer.
PSR-I300 Owner's Manual
53