Adding A Memory Module - Samsung P560 Service Manual

- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization -
4. Troubleshooting

4-9. Adding a Memory Module

Windows / Screen Related Problems
1. Remove the screw on the memory compartment cover at
the bottom of the computer using a screw driver.
2. Insert a new memory module into the memory slot at an angle
of approximately 30 degrees aligning it to the angle of the
memory slot.
3. Push the memory module down so that it is completely fixed.
If the memory does not fit easily, push the memory module
down while pulling the memory module latches outward.
4. Close the memory compartment cover and fasten the screw
* Replace or install new memory only after shutting the computer down completely. Donot replace or install memory when the
computer is in Sleep mode.
* To utilize the dual channel feature, using memory modules with the same specifications (of the same capacity and from the same
manufacturer) is recommended.
Note
Removing a memory module Pull the
memory module latches outward.
The memory module will pop up.
Remove the memory module out at an angle
of 30 degrees.
4-32
Fixing Screw