Table of Contents
Advertisement
INSTALLING THE IS-SOFT
Install the IS-SOFT on your PC from the DVD supplied with this product.
*
You may need to log on to your PC as the Administrator to install the IS-SOFT.
System requirements for PC
Your PC must meet the following system requirements to use the IS-SOFT.
Also refer to the instruction manual supplied with your PC.
OS
Processor
System memory
(RAM)
Hard disk
Sound card
Display
Run-time
Network
Protocol
Network bandwidth
The application may not run, or may not operate correctly (such as freezes occurring) on a PC with specifi cations below the
•
necessary requirements.
Serious damage could be caused if an error occurs during door release.
•
•
We recommend using a PC and DVD drive that exceed the basic system requirements.
Windows XP Home/Professional (SP3) (32bit)
Windows Vista Ultimate/Home/Business/Enterprise (SP2) (32/64bit)
Windows 7 Home Premium/Professional/Enterprise/Ultimate (32/64bit)
2 GHz or higher
1 GB RAM or higher
10 MB or more (additional space is needed for recording)
8 bit full duplex, Direct Sound compatible
800 x 600 or higher (x 1)
1024 x 768 or higher (x 2)
1920 x 1200 or higher (x 3)
Microsoft (R).NET Framework 2.0 or later
10BASE-T/100BASE-TX Ethernet
TCP/IPv4, UDP/IPv4, SIP, Others
320k to 8Mbps
5
Advertisement
Table of Contents
