Wi-Fi Protected Setup (Wps) - Epson WorkForce Pro WF-C5310 User Manual

Note: Your password must be at least 8 and no more than 22 characters long.
Note: If you have already connected devices or computers to your product via Wi-Fi Direct, they will
be disconnected when you change the network name or password.
7. When entering your Wi-Fi Direct network name or password, do the following:
• To enter letters or symbols, press the arrow buttons to scroll through characters, and press the
OK button to select one.
• To enter numbers and symbols or change the case of letters, select AB1# and press the OK
button.
• To delete the previous character, select the
• To enter a space, select the
8. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the
LCD screen, then enter the password shown.
Note: Make a note of the SSID and password that appear.
9. Press the
Computers and wireless devices can now access the product using the new network name and
password.
Parent topic:

Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.
Using WPS to Connect to a Network
Parent topic:
space icon and press the OK button.
home button to return to the home screen.
Wi-Fi Direct Mode Setup
Wi-Fi or Wired Networking
back icon and press the OK button.
54