Adjusting Print Quality; Print Head Maintenance; Print Head Nozzle Check; Checking The Nozzles Using The Product Control Panel - Epson WorkForce Pro WF-C5310 User Manual

Adjusting Print Quality

If your print quality declines, you may need to run a utility to clean or align the print head.

Print Head Maintenance

Print Head Alignment
Cleaning the Paper Guide
Cleaning the Translucent Film
Checking the Number of Sheets on the LCD Screen
Print Head Maintenance
If your printouts become too light, or you see dark or light bands across them, you may need to clean the
print head nozzles. Cleaning uses ink, so clean the nozzles only if print quality declines.
You can check for clogged nozzles before you clean them so you don't clean them unnecessarily.

Print Head Nozzle Check

Print Head Cleaning
Parent topic:
Print Head Nozzle Check
You can print a nozzle check pattern to check for clogged nozzles.

Checking the Nozzles Using the Product Control Panel

Checking the Nozzles Using a Computer Utility
Parent topic:
Checking the Nozzles Using the Product Control Panel
You can check the print head nozzles using the control panel on your product.
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the product.
3. Press the
4. Use the arrow buttons to select Maintenance and press the OK button.
5. Press the down arrow button, select Print Head Nozzle Check and press the OK button.
6. Select Print and press the OK button.
Adjusting Print Quality
Print Head Maintenance
home button, if necessary.
167