Enabling Periodic Cleaning; Powering Off Or Rebooting The Product Remotely - Epson WorkForce Pro WF-C5310 User Manual

2. Select the Device Management tab, then select the Clear Internal Memory Data setting.
3. Select Delete and confirm your selection.
Parent topic:
Related tasks
Accessing the Web Config Utility

Enabling Periodic Cleaning

You can set a schedule to clean the print head using the Web Config interface.
1. Log in to the Web Config interface as an administrator.
2. Select the Device Management tab, then select the Periodic Cleaning setting.
3. Select one of the following options:
• To clean the print head after a print job, select After Printing.
• To run a cleaning cycle at a specific time, select Schedule and choose a time from the drop-down
list.
Parent topic:
Related tasks
Accessing the Web Config Utility

Powering Off or Rebooting the Product Remotely

You can power off or reboot the product using the Web Config interface.
1. Log in to the Web Config interface as an administrator.
2. Select the Device Management tab, then select the Power setting.
3. Select a power option from the drop down menu and select Execute.
Note: After turning off the product, you cannot access Web Config until the product is turned on again.
Parent topic:
Related tasks
Accessing the Web Config Utility
Configuring Product Settings
Configuring Product Settings
Configuring Product Settings
200