Table of Contents
Advertisement
Related references
IEEE 802.1X Network Settings
IEEE 802.1X Network Status
Related tasks
Configuring a Certificate for an IEEE 802.1X Network
IEEE 802.1X Network Settings
You can configure these IEEE 802.1X network settings in Web Config.
Setting
EAP Type
User ID
Password
Confirm Password
Server ID
Anonymous Name
Encryption Strength
Parent topic:
Related tasks
Configuring an IEEE 802.1X Network
Options/Description
Select one of these authentication methods for connections
between the product and a RADIUS server:
EAP-TLS or PEAP-TLS: You must obtain and import a CA-
signed certificate
PEAP/MSCHAPv2: You must configure a password
Enter an ID for authentication on a RADIUS server
Enter a password for authentication of the product.
Enter the authentication password again
Enter a server ID for authentication on a specified RADIUS
server; server ID is verified in the subject/subjectAltName field
of a server certificate sent from the RADIUS server
If you selected PEAP-TLS or PEAP/MSCHAPv2 as the
Authentication Method setting, you can configure an
anonymous name instead of a user ID for phase 1 of a PEAP
authentication
Select one of the following encryption strengths:
High for AES256/3DES
Middle for AES256/3DES/AES128/RC4
Connecting the Product to an IEEE 802.1X Network
221
Advertisement
Table of Contents
