Table of Contents
Advertisement
Installation — Video Guidance System
NOTES
D This manual makes references to other components in the RoadLazer System. See RoadLazer System manual
308611 for details about those components.
D This manual covers two systems for guiding the RoadLazer striper. Each system can be operated by itself to
guide the vehicle; however, to maximize productivity and accuracy in a one-person operation, you should use
the Video Guidance System and the Front Mechanical Pointer System together, as referenced in this manual.
Reference numbers in parentheses in the text refer
to numbers in Parts section of this manual.
Install Video Camera Support Hardware
1. Install suitable support rack (A, not provided) on
top front of truck bed sidewalls. Center support
rack on truck as shown in Fig. 1.
2. Install horizontal support bracket (51) on support
rack. Make sure support bracket is level, as
shown in Fig. 1.
A
Fig. 1
51
06657B
3. Install adjustable-height camera extension
arm (58) with vertical support bracket (63) and
support arm (62), OR install straight camera
extension arm (64). See Fig. 2.
NOTE: Straight camera extension arm (64) can
be used if camera angle is adequate from height of
horizontal support bracket (51). See Fig. 9 on
page 8 for correct camera/pointer alignment.
4. Install camera assembly on arm (62 or 64).
51
58
63
62
... OR ...
51
64
Fig. 2
61
61
9206A
309008
3
Advertisement
Table of Contents
