Maintenance
Front Mechanical Pointer System Maintenance
Fig. 16
NOTE: Wheel and pivot points use same nuts,
17
washers, spacers, seals, bearings, and bolts. For
16
14
wheel only, bearings and seals are assembled
internally and not called out as separate parts on
page 18.
14
Lubricate Wheel Axle
13
Grease axle bolt (13) monthly. Do not over-grease or
inject grease too rapidly, because seals might get
pushed out. Axle bolt may require more frequent
seal
greasing during periods of heavy use.
Lubricate Pivot Points
Grease pivot bolts (13) yearly. Do not over-grease or
inject grease too rapidly, because seals (29) might get
pushed out. Bolt may require more frequent greasing
during periods of heavy use.
Torque Axle Nut and Pivot Point Nuts
13, 17, 29
Retorque nuts (17) yearly. For proper torque, tighten
13, 17, 29
nut up to the point where washer (16) begins to
compress, then tighten an additional 1/4 turn.
13, 17, 29
9237A
Fig. 16
12
309008