Table of Contents
Advertisement
Trailer Reverse Guidance
E209766
Positioning the Trailer
Hitch the trailer to your vehicle and
connect the electrical wiring harness.
Check to make sure that the wiring is
working. See Connecting a Trailer (page
340).
E247482
Park your vehicle and hitched trailer on a
level surface.
For best results, make sure that your trailer
rides level with the ground when you hitch
your vehicle. See Connecting a Trailer
(page 340).
E247481
2022 Expedition (TB8) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
(If Equipped)
Make sure that the trailer and your vehicle
are in line with each other. You can do this
by putting the transmission in drive (D) and
pulling straight forward.
Configuring the Trailer in the
Touchscreen
1.
Shift to reverse (R).
2. Press the camera view button.
3. Press the trailer view icon.
4. Press Add Trailer.
5. Follow the directions on the
touchscreen to enter the trailer name,
then proceed to the sticker setup. See
Applying the Trailer Reverse Aid
Sticker (page 368).
APPLYING THE TRAILER
REVERSE AID STICKER
Place the sticker in an area visible by the
rear view camera. The entire sticker must
be within 4–19 in (10–48 cm) from the
center of the hitch ball, as shown in the
following illustration.
E333148
368
Advertisement
Table of Contents
Troubleshooting
