CHANGING A REVERSING LAMP
BULB
E248889
A
Reversing lamp bulb.
B
Rear lamp, stoplamp and turn
signal bulb.
1.
Remove the rear lamp assembly. See
Removing a Rear Lamp Assembly
(page 410).
2. Disconnect the electrical connector.
3. Turn the bulb holder counterclockwise
and remove it.
4. To install, reverse the removal
procedure.
2022 Expedition (TB8) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Maintenance
CHANGING A LICENSE PLATE
LAMP BULB
E292276
1.
Use a suitable tool, for example a
screwdriver, to carefully remove the
lamp.
2. Turn the bulb holder counterclockwise
and remove it.
3. Remove the bulb by pulling it straight
out.
4. To install, reverse the removal
procedure.
INTERIOR BULBS
INTERIOR BULB SPECIFICATION
CHART
Your vehicle has LED lamps. These are not
serviceable items. See an authorized dealer
if they fail.
412