Nortel DMS-250 Reference Manual page 257

Table 13-2
Cause values mapped differently
Cause
Channel unacceptable (6)
Call awarded and being delivered in
an established channel (7)
Non-selected user clearing (26)
Quality of service unavailable (49)
Identified channel does not exist (82)
A suspended call exists, but this call
identity does not (83)
Call identity in use (84)
No call suspended (85)
Call having the requested call identity
has been cleared (86)
Invalid transit network selection (91)
(98)
VNET services
The VNET services discussed below are available for ETSI PRI.
Access to NCS/DAP
For ETSI PRI, both dedicated VNET access or shared VNET access is
available.
Digital Switching Systems DMS-250 ISDN Reference Manual MWC14 (CSP14)
Treatment
Received on an ETSI PRI agent,
mapped to cause value 41 "Temp fail"
From customer connect onto the ETSI
PRI agent, this cause value is
mapped to 00 "Unassigned number."
Reorder (RODR)
From customer connect onto the ETSI
PRI agent, this cause value is
mapped to 00 "Unassigned number."
Received on an ETSI PRI agent,
mapped to cause value 41 "Temp fail"
Rejected with "Invalid information
element contents." This cause value is
then mapped to cause value 31,
"Normal unspecified."
From customer connect onto the ETSI
PRI agent, this cause value is
mapped to 00 "Unassigned number."
Received or sent out on an ETSI PRI
agent, this is mapped to cause value
111 "Protocol error unspecified"
—end—
ETSI PRI 13-15