Nortel DMS-250 Reference Manual page 139

immediately after AUTHCODE validation is performed, using the authcode
datafilled against call attribute index 25.
LTID CALLTYP XLARTE
ISDN20 TIE XLAIEC
If the optional RTEREF field is omitted (that is, a $ is entered instead of an
outgoing route index such as OFRT 20), the call proceeds through the
standard IEC translations and screening.
The following example shows table LTCALLS with IEC translation and
routing. All PRISM calls originating on LTID ISDN 20 are translated,
screened, and routed according to the IEC translations parameters. This is
indicated by the absence of a value for the field RTEREF.
LTID CALLTYP XLARTE
ISDN20 PRISM XLAIEC
IEC translation and routing
XLAIEC processes calls using procedures for DMS-250 switch digit
interpretation, translations, screening, and routing. (The XLARTE field
should be datafilled with the value XLAIEC. This field specifies the call
type will receive its translations and routing information from the IEC
translations tables.)
The following IEC translations are supported:
offnet dialing
private network dialing (onnet dialing)
public speed dialing
time-restricted calling
international dialing
operator services dialing
test calls
VNET dialing
The following IEC translations are not supported:
VNET calling card
security digits
credit card dialing
reset dialing
Digital Switching Systems DMS-250 ISDN Reference Manual MWC14 (CSP14)
CALLATTR RTEREF
25 OFRTR90
CALLATTR RTEREF
25 $
Feature interaction 7-11
OPTIONS
$
OPTIONS
$