Install The Access Point To A 9/16Th T-Bar Ceiling - Extreme Networks ExtremeWireless AP3000X Installation Manual

Access Point Installation
Figure 8: AH-ACC-BKT-AX-SL accessory bracket circular tip
Call out
1
5. Press and rotate the access point clockwise until it locks into place on the accessory.
6. Connect the network cable.
7. Replace the ceiling tiles.

Install the Access Point to a 9/16th T-bar Ceiling

Before You Begin
You need the following items:
•
AP3000X
•
One AH-ACC-BKT-AX-IL accessory bracket
About This Task
You can mount the access point to a ceiling that has a 9/16 in. wide T-bar with a center
protrusion.
Install the Access Point to a 9/16th T-bar Ceiling
Description
AH-ACC-BKT-AX-SL bracket circular tip
ExtremeWireless™ AP3000X Access Point Installation Guide 25