Install the Access Point to a 9/16th T-bar Ceiling
Figure 9: AH-ACC-BKT-AX-SL accessory bracket circular tip
Call out
1
5. Press and rotate the access point clockwise until it locks into place on the accessory.
6. Connect the network cable.
7. Replace the ceiling tiles.
Install the Access Point to a 9/16th T-bar Ceiling
Before You Begin
You need the following items:
•
AP3000
•
One AH-ACC-BKT-AX-IL accessory bracket
About This Task
You can mount the access point to a ceiling that has a 9/16 in. wide T-bar with a center
protrusion.
26
ExtremeWireless™AP3000 Access Point Installation Guide
Description
AH-ACC-BKT-AX-SL bracket circular tip
Access Point Installation