Install The Access Point On A Standard Ceiling - Extreme Networks ExtremeWireless AP4000 Installation Manual

Install the Access Point
•
One mounting bracket for 15/16 in. T-bar ceiling installation (part number AH-ACC-BKT-AX-TB)
•
One quick reference guide
All optional brackets and accessories are sold separately. For detailed instructions about all mounting
procedures, see

Install the Access Point on a Standard Ceiling

Details about access point installation on a standard ceiling
Before You Begin
Hardware requirements for installation:
•
One AP4000 access point
•
One AH-ACC-BKT-AX-TB bracket
About This Task
The access point ships with the AH-ACC-BKT-AX-TB mounting bracket for standard 15/16 in. dropped
ceiling grid or for 9/16 in. wide and flat T-bar, and for walls or solid surfaces with the appropriate
mounting hardware. For wall or solid surface installation using the AH-ACC-BKT-AX-TB bracket, see
Install the Access Point on a Wall or a Solid Surface Using the AH-ACC-BKT-AX-TB Bracket
For non-standard ceiling rail installations, see
a Wall.
The bracket and the access point have a red dot on the back that acts as a guide during installation.
To install the access point:
Procedure
1. Remove the ceiling tiles.
Note
The mounting bracket includes wall mounting hardware; two screws and two anchors for
wall installation.
802.11ax and Cloud Access Points Accessories
Install the Access Point on a Standard Ceiling
Guide.
Install the Access Point on a Non-Standard Ceiling Grid or
ExtremeWireless™ Indoor Access Point AP4000
on page 15.
13