Table of Contents
Advertisement
Zoom Buttons
SHIFT
Left or SLOW
Rewind Button
Right or SLOW
Forward Button
Normal playback
Playback Zoom
FEATURE:
PURPOSE:
To magnify the recorded image up to 10X at any time during playback.
OPERATION:
1) Press PLAY (4) to find the scene of interest.
2) Press the Zoom Buttons (T/W) on the remote control. Make sure the remote control is pointed at the
camcorder's remote sensor. Pressing T zooms in.
3) You can move the image on screen around to find a particular portion of the picture. While holding down
SHIFT, press
To end zoom, press and hold W until magnification returns to normal. Or, press STOP (5) and then press PLAY (4).
NOTES:
● Zoom can also be used during slow-motion and still playback.
● Due to digital image processing, the quality of the image may suffer.
● Playback Zoom cannot be used on images that were recorded when "CAMERA MODE" is set to "PS-VIDEO"
(
pg. 26, 27).
Downloaded from:
Remote sensor
Up Button
Down Button
PLAY
PAUSE
STOP
Press T
To move image,
press
(Right)
while keeping
SHIFT held down.
(Left),
(Right),
(Up) and
https://www.usersmanualguide.com/
Slow-Motion Playback
FEATURE:
PURPOSE:
To allow slow-speed search in either direction during
video playback.
OPERATION:
1) To change from normal to Slow-Motion Playback, press
SLOW (9 or 0) more than approx. 2 seconds. After
approx. 5 minutes (approx. 20 seconds with a 80-
minute cassette) in Slow Rewind or Forward, normal
playback resumes.
To stop Slow-Motion Playback, press PLAY (4).
NOTES:
● You can also engage Slow-Motion Playback from Still
Playback by pressing SLOW more than approx. 2
seconds.
● During Slow-Motion Playback, due to digital image
processing, the picture may take on a mosaic effect.
● After SLOW (9 or 0) is pressed and held, the still image
may be displayed for a few seconds, followed by a blue
screen for a few seconds. This is not a malfunction.
● There may be a small margin between the slow-motion
playback start point you chose and the actual start
point for Slow-Motion Playback.
● During Slow-Motion Playback, there will be distur-
bances in video and the picture may seem unstable,
especially with steady images. This is not a malfunc-
tion.
● During Slow-Motion Playback, press PAUSE (6) to
pause playback.
Frame-By-Frame Playback
FEATURE:
PURPOSE:
To allow frame-by-frame search during video playback.
OPERATION:
1) To change from normal to Frame-By-Frame Playback,
press SLOW (0) repeatedly for forward or SLOW (9)
repeatedly for reverse. Each time it is pressed, the frame
is played back.
NOTE:
You can also engage Frame-By-Frame Playback from Still
Playback by pressing SLOW (9 or 0) repeatedly.
(Down).
63
EN
Advertisement
Table of Contents
