Table of Contents
Advertisement
Power Switch
SNAPSHOT
Button
Recording Start/Stop Button
Display
5S
–
Downloaded from:
Shooting
Mode Switch
Lock Button
MENU Wheel
Menu Screen
OF F
5S
AN I M .
https://www.usersmanualguide.com/
5-Second Recording
Record a vacation or an important event in 5-second clips
to keep the action moving. This function is available only
for video recording.
1
Set the Shooting Mode Switch to "VIDEO", then set
the Power Switch to "
Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select "
and press it. The MANUAL Menu appears.
4
Rotate the MENU wheel to select "5S", and press it.
The Sub Menu appears.
5
Rotate the MENU wheel to select "5S", and press it.
Selection is complete. Rotate the MENU wheel to
select "1RETURN", and press it twice to close the
Menu Screen.
•"5S" appears.
6
Press the Recording Start/Stop Button. The tally lamp
lights and beep sounds to indicate the start of
recording, and after 5 seconds the camcorder enters
Record-Standby mode.
•Even if you press the Recording Start/Stop Button
again within 5 seconds after recording starts,
Record-Standby mode is not engaged.
7
To exit the 5S mode, select "OFF" in step 5.
To Take A Snapshot In The 5-Second Recording Mode . . .
.... instead of pressing the Recording Start/Stop Button in
step 6, select the desired Snapshot mode in the Menu
Screen, then press SNAPSHOT. The camcorder
records a 5-second still (
to "ANIM." (
pg. 28) this function is not available.
NOTE:
When "5S" is set to "ANIM." in the Menu Screen the
5-second recording mode is not available. Animation
recording of a few frames only is taken instead (
31
EN
" while pressing down the
MANUAL",
pg. 18). When "5S" is set
pg. 28).
Advertisement
Table of Contents
