Dubbing To A Vcr - JVC GR-DV1800 Instructions Manual

56
EN
Power Switch
Connector
cover**
S-Video
cable
(provided)
"Y/C"/"CVBS"
video out
select switch
* Connect when an S-Video cable is not used.
** When connecting the cables, open this
cover.
Downloaded from:
To
AV
To
S-VIDEO
Audio/Video cable
[mini-plug to RCA plug]
(provided)
To AUDIO, VIDEO*
and -IN
connectors
Cable Adapter
(provided)
If your VCR has a
SCART connector,
use the provided
cable adapter.
VCR
TV
https://www.usersmanualguide.com/

Dubbing To A VCR

[To use this camcorder as a player]
1
Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 52 and 53.
2
Set the camcorder's Power Switch to "
pressing down the Lock Button located on the switch,
turn on the VCR's power, and insert the appropriate
cassettes in the camcorder and the VCR.
3
[For GR-DV2000 owners only]
Set "S/AV INPUT" to "OFF" in the Menu Screen
( pg. 39).
4
Engage the VCR's AUX and Record-Pause modes.
5
Engage the camcorder's Play mode to find a spot just
before the edit-in point. Once it is reached, press 4/
6 on the camcorder.
6
Press 4/6 on the camcorder and engage the VCR's
Record mode.
7
Engage the VCR's Record-Pause mode and press 4/6
on the camcorder.
8
Repeat steps 5 through 7 for additional editing, then
stop the VCR and camcorder when finished.
NOTES:
● You can use Playback Zoom (
Special Effects ( pg. 64) in step 6.
● Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do, they are
being recorded onto the new tape.
● Set the video out select switch of the cable adapter as
required:
Y/C : When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does
not accept Y/C signals and uses an audio/video
cable.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen (
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 39).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set "ON SCREEN" to "LCD" or "LCD/TV" in the
Menu Screen (
remote control.
DUBBING
pg. 63) or Playback
pg. 39).
pg. 39). Or, press DISPLAY on the
" while