Table of Contents
Advertisement
22
EN
Power Switch
SNAPSHOT
Button
Recording Start/Stop Button
Downloaded from:
RECORDING
Shooting
Mode Switch
Lock Button
https://www.usersmanualguide.com/
Advanced Features For Video And D.S.C.
Progressive Mode Recording
This mode lets you record moving images (successive
jitter-free still images) onto a tape. Images can then played
back jitter-free, with superior quality. High-resolution still
images can also be processed on a personal computer or
can be printed out (
pg. 55).
1
Set the Shooting Mode Switch to "VIDEO", then set
the Power Switch to "
Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully.
2
Set "CAMERA MODE" to "PS-VIDEO" in the Menu
Screen (
pg. 26, 27).
3
To start Progressive Mode Recording, press the
Recording Start/Stop Button.
To End Progressive Mode Recording . . .
.... press the Recording Start/Stop Button. The camcorder
enters the Record-Standby mode.
NOTES:
● When an image recorded using the Progressive Mode is
played back, the image may not look natural.
● When "CAMERA MODE" is set to "PS-VIDEO", Picture
Wipe/Dissolve (
pg. 32) and some Programme AE
with special effects (
● If SNAPSHOT is pressed in the PS-VIDEO mode, a
snapshot will be recorded with higher quality than in
VIDEO mode. However, "MULTI-4" and "MULTI-9"
cannot be used (
pg. 18).
" while pressing down the
pg. 34) cannot be used.
Advertisement
Table of Contents
