Symbols; Safety Warnings - Graco Standard 946-964 Instructions Manual

1:1 ratio sanitary pump
Table of Contents

Advertisement

Warning Symbol
This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious
injury.
INSTRUCTION
S
This equipment is for professional use only.
N
Read all instruction manuals, tags, and labels before operating the equipment
Use the equipment only for its intended purpose. If you are not sure, call your Graco
distributor.
Do not alter or modify this equipment.
Check equipment daily. Repair or replace worn or damaged parts immediately.
Do not exceed the maximum working pressure of the lowest rated system component.
Refer to the Technical Data for the maximum working pressure of this equipment.
Use fluids and solvents which are compatible with the equipment wetted parts. Refer to
the Technical Data section of all equipment manuals.
manufacturer's warnings.
Do not use hoses to pull equipment.
Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do
not expose Graco hoses to temperatures above 180°F (82°C) or below -40°F (-40°C).
Wear hearing protection when operating this equipment.
Do not lift pressurized equipment.
Comply with all applicable local, state, and national fire, electrical, and safety regulations.
2
684-021

Symbols

Caution Symbol
This symbol alerts you to the possibility of damage
to or destruction of equipment if you do not follow
the instructions.
WARNING
Read the fluid and solvent

Advertisement

Table of Contents
loading

Table of Contents