Symbols; Definition Of Terms; Warnings - Graco Hydra-Cat 965-481 Instructions Manual

Warning Symbol
WARNING
This symbol alerts you to the possibility of serious injury
or death if you do not follow the instructions
WARNING: Alerts the user to avoid or correct conditions
which could cause serious injury.
CAUTION: Alerts the user to avoid or correct conditions
which could damage or destroy equipment.
NOTE: Identifies helpful information.
VRHC: The abbreviation for Variable Ratio Hydra–Cat
Pump. This pump automatically proportions and mixes two
fluids in a prescribed ratio, which is variable within the
ranges listed on the cover.
PLURAL COMPONENT FLUID HAZARD
Before using this equipment, read the fluid manufacturer's warnings and determine all facts relating to the
fluids used, including any of the potential hazards relating to toxic fumes, fires, explosions, reaction times,
and exposure of human beings to the individual components of their resultant mixtures.
Store hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state
N
and national guidelines.
Wear the appropriate protective clothing, gloves, eyewear, and respirator.
N
Graco does not manufacture or supply any of the reactive chemical components that may be used in
N
this equipment and is not responsible for their effects. Graco assumes no responsibility for loss,
damage, expense or claims for personal injury or property damage, direct or consequential, arising
from the use of such chemical components.
MOVING PARTS HAZARD
Moving parts, such as the air motor piston and the secondary pump lever and connecting rod area, can
pinch or amputate fingers.
Do not operate the equipment with the guards removed.
N
Keep your body and tools clear of any moving parts when starting or operating the equipment.
N

Symbols

Definition of Terms

WARNING
Caution Symbol
CAUTION
This symbol alerts you to the possibility of damage to or
destruction of equipment if you do not follow the
instructions.
BASE: Also called polyol or resin, is one of two reactive
chemicals used in a plural component system.
CATALYST: Also called hardener, is the fluid which reacts
with the base fluid.
PART: An undefined unit of measurement. When you
determine the size of the unit (ounce, pint, gallon), use that
measurement consistently in setting up your system.
SPRAY GUN: This term refers to any type of spray gun or
dispensing valve used to spray or dispense the fluid being
pumped.
684-026 3