Drive Shaft And Power Head - Echo Power Pruner PPT-266LA Operator's Manual

ASSEMBLY
4. Align flexible drive shaft coupler with drive shaft socket and slide
together until handle assembly is fully seated into drive shaft.
5. Tighten clamping bolts (A).

Drive Shaft and Power Head

1. Stand power head upright on a level surface.
2. Loosen the drive shaft clamp
bolt (A) at engine drive shaft
clamp.
3. Remove dust cap if necessary,
and carefully fit drive shaft
assembly to engine making
sure that inner drive shaft
engages into clutch mount.
Note: Gear Housing must be
aligned properly with
engine.
4. Tighten drive shaft clamp bolt
(A) securely.
5. Route throttle linkage and ignition lead assembly through clip below fan
housing.
16
PPT-226LA
A
X7712090701
© 06/21 ECHO Incorporated