Table of Contents
Advertisement
MAINTENANCE
6.
Install guide bar and chain on
gear case, engaging chain with
drive sprocket (E).
7.
Turn tension adjustment screw
(C) clockwise to take up slack
in saw chain.
8.
Install guide bar cover (D), and
tighten guide bar nuts finger
tight and install guide bar cover
screw (B).
9.
Adjust chain tension.
Guide Bar Cover Cleaning
1.
Remove two guide bar nuts (A)
and guide bar cover screw (B).
2.
Remove guide bar cover (D).
3.
Gently brush debris from inside
guide bar cover and from
around sprocket.
40
E
D
B
C
© 06/21 ECHO Incorporated
PPT-226LA
A
X7712090701
Advertisement
Table of Contents
