Using Pulse Modulation (Option Unw Or 320) - Agilent Technologies X Series User Manual

Using Pulse Modulation (Option UNW or 320)

Figure 6-1 Pulse Softkeys
Note: Pulse Period
and Pulse Width are
not available when
Pulse Train is selected
as the Pulse Source.
These softkeys are
only available when
the Pulse–Source is
set to Adjustable
Doublet.
Determines how the signal generator
responds to an external pulse signal.
Normal = high state.
Invert = low state.
Available on vector
instruments with
BBG.
For details on each key, use key help
as described on page 44.
130
TTL signal
See also, page 14
and page 17
page 133
Low = settled
Latency from the external
pulse input to the pulse
sync output ≈ 50−60 ns.
Width Period
> 50 ns
50 ns
≤ 50 ns
20 ns
Agilent X-Series Signal Generators User's Guide
page 133
page 135
Select the signal
routed to each
output connector.