Pulse Modulation Subsystem-Option Unu And Unw([:Source]); Pulm:external:polarity; Pulm:internal[1]:Delay:step; Pulm:internal[1]:Delay[1]|2 - Agilent Technologies n5181a Command Reference Manual

Mxg signal generators
Hide thumbs Also See for n5181a:
Table of Contents

Advertisement

Pulse Modulation Subsystem–Option UNU and UNW([:SOURce])

:PULM:EXTernal:POLarity

Supported
All with Option UNU and UNW
[:SOURce]:PULM:EXTernal:POLarity NORMal|INVerted
[:SOURce]:PULM:EXTernal:POLarity?
This command selects the polarity of the TTL input signal at the TRIG IN rear panel connector. The
signal generator can respond to either a normal (a TTL high) or an inverted (TTL low) signal.
Example
:PULM:EXT:POL NORM
The preceding example selects normal (TTL high) polarity.
*RST
Normal
Ext Polarity Normal Inverted
Key Entry

:PULM:INTernal[1]:DELay:STEP

Supported
All with Option UNU and UNW
[:SOURce]:PULM:INTernal[1]:DELay:STEP <num><time_suffix>
[:SOURce]:PULM:INTernal[1]:DELay:STEP?
This command sets the step increment for the pulse delay.
The step value, set by this command, is used with the UP and DOWN choices in the
":PULM:INTernal[1]:DELay[1]|2" on page 131
The step value set with this command is not affected by a signal generator power- on, preset, or *RST
command.
Example
:PULM:INT:DEL:STEP 10NS
The preceding example sets the pulse delay step value to 10 nanoseconds.
Range
10nS to (pulse period – 20 nS)
Key Entry
Incr Set

:PULM:INTernal[1]:DELay[1]|2

Supported
All with Option UNU and UNW
[:SOURce]:PULM:INTernal[1]:DELay[1]|[2] <num><time_suffix>|UP|DOWN
[:SOURce]:PULM:INTernal[1]:DELay[1]|[2]
This command sets the pulse delay for the internally- generated pulse modulation using the variable
<num>[<time_suffix>]. The command, used with the UP|DOWN parameters, will change the delay by a
user- defined step value. Refer to the
setting the value associated with the UP and DOWN choices.
Agilent N5181A/82A MXG Signal Generators SCPI Command Reference
Pulse Modulation Subsystem–Option UNU and UNW([:SOURce])
command.
:PULM:INTernal[1]:DELay:STEP
Analog Modulation Commands
command on
page 131
for
131

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents