Rear Panel Overview (N5171B, N5172B, N5181B, & N5182B); Ac Power Receptacle - Agilent Technologies X Series User Manual

Rear Panel Overview (N5171B, N5172B, N5181B, & N5182B)
Digital Modulation Connectors (Vector Models Only)
Option 1EM
3. LF OUT
only
See page 7
2. EXT 1 &
EXT 2

1. AC Power Receptacle

The AC power cord receptacle accepts a three–pronged AC power cord that is supplied with the
signal generator. For details on line setting requirements and the power cord, see the Getting
Started Guide.
CAUTION To avoid the loss of data, GPIB settings, or current user instrument states that have not
been permanently saved to non- volatile memory, the signal generator should always be
powered down either via the instrument's front panel power button or the appropriate
SCPI command. Signal generators installed in rack systems and powered down with the
system rack power switch rather than the instrument's front panel switch display a
Error - 310 due to the instrument not being powered down correctly.
Agilent X-Series Signal Generators User's Guide
on page 16
6. TRIG 1 & 2
5. PULSE
4. SWEEP OUT
Rear Panel Overview (N5171B, N5172B, N5181B, & N5182B)
9. GPIB
8. 10 MHz OUT
7. REF IN
Signal Generator Overview
1. AC Power Receptacle
10. LAN
13. SD Card
12. Host USB
11. Device USB
13