Leveling The Machine - True RC900 Owner's Manual

LEVELING THE MACHINE

CAUTION:
!
Prevent potential damage to the machine and injury to the user. This unit is equipped with four leveling feet. Make sure
that the bike is level at all times. If the bike is placed on a uneven surface, adjusting the leveling feet can help, but may not
completely compensate for extremely uneven surfaces. Bikes that are not level can cause damage to the machine and
possible injuries for the user.
Once the machine has been moved to it's designated location:
1. Using a 19mm wrench, adjust all four leveling feet until they contact the fl oor.
IMPORTANT! Do not adjust the leveling feet to such a height that they detach or unscrew from the machine.
2. Verify all four lock nuts are securely tightened and fl ush against the bottom of the frame.
leveling feet
Tools Used in this Step
19mm Wrench
lock nut lock nut
35