ASSEMBLY INSTRUCTIONS
NOTE: Supplemental video available on vimeo.com: https://vimeo.com/805335941.
PRE-ASSEMBLY CHECKLIST
BASIC GUIDELINES FOR SETTING UP THE EQUIPMENT
After removing the equipment from the packaging, place the equipment on a clean, level surface. Make sure the electrical
cord easily reaches a grounded three-pronged outlet.
DANGER:
!
*
Do not use an extension cord or ungrounded outlet. The ground helps prevent electrical damage to
your equipment and enhances your safety by helping to prevent shock. Check with a qualifi ed electrician or serviceman if
you are in doubt as to whether the equipment is properly grounded. Do not modify the plug provided with the unit if it will
not fi t the outlet. Have a proper outlet installed by a qualifi ed electrician.*
*Power warnings, grounding instructions, and power requirements are only applicable when this product is being used
with the optional power supply.*
NOTE: The Envision II 16" and ShowRunner II consoles require the optional power supply.
!
CAUTION:
Use caution when assembling this product.
Unpacking and assembling of this product is a two person task.
VERIFY BOX CONTENTS
IMPORTANT! Please verify box contents. If you have questions, or if there are any missing parts, contact product support
(service@truefi tness.com // 800.883.8783).
TOOLS NEEDED FOR ASSEMBLY
5mm Allen Wrench
6mm Allen Wrench
8mm Allen Wrench
15mm Wrench
#2 Phillips Screwdriver
Wire Cutters
Torque Wrench With 15mm Head
19mm Wrench
12
INCLUDED
IN BOX
YES
YES
YES
YES
NO
NO
NO
NO