Safety Information - Henny Penny FlexFusion FSE-610 Installation Manual

Ensuring conformity with
standards
Improper installation
Transportation and storage
Fire prevention
Organisational measures
2

Safety information

The unit complies with applicable safety standards. Residual risks
associated with operation or risks resulting from incorrect operation cannot
be ruled out and are mentioned specifically in the safety instructions and
warnings.
The installer must be familiar with regional regulations and observe them.
Observe applicable international, European and national laws, regulations,
standards and directives for the unit when transporting, setting up and
connecting it.
Risk of property damage and personal injury from improper
installation
▪ Install the unit only as specified in these installation instructions.
▪ Do not add anything to the unit or modify the unit.
▪ Use only original spare parts.
Risk of personal injury and property damage from improper
transportation and improper storage.
▪ Store the unit in a dry, frost-free environment.
▪ Observe the safety regulations for the lifting gear used.
▪ Attach the unit to the lifting gear securely during transport and setup, and
prevent it from dropping.
▪ Transport the unit in an upright position, do not tilt or stack.
▪ Pay attention to protruding parts when transporting the unit without
packaging.
Risk of fire from combustible surfaces
▪ Observe general fire prevention regulations.
Risk of property damage and personal injury from lack of
organizational measures
▪ Identify hazard areas when transporting, setting up and connecting the
unit.
▪ Prior to starting the installation work, notify any operators present about
the procedure.
Safety information
2
7